Wegener International - High Frequenzy Testing Devices


Company		Products		Special Solutions		Services		News		Contact

Disclaimer

Home

Pinhole detector Models PHD - 0,5 – 6 / PHD 1 – 20 / PHD 2 - 40

Welding
Bending
Geosynthetics
Testing
Airtest >
Tensile tester: Minitest > Site Tensile tester > Tensile Creep Testing System >
High frequency tester WEG 100 > WEG 24 > PHD > WRLD >
Measuring tools >
Industrial Heating
Used Machines

This test instrument will enable your inspectors to quickly check for pinholes and porosity on a wide range of non-conductive coatings and linings in the following industries: petrochemical, pipeline construction, plastic fabrication and aerospace etc.

Technical Data
Output range	0,5 kV to 6 kV / 1 to 20 kV / 2 to 40 kV
Variable sensitivity	up 0 to 500 μA
Operation time	up to 10 hours
Weight	1,7 kg up to 6,5 kg
Dimensions	26,5 x 21,0 x 12,5 cm
Measuring accuracy	+/- 1,0%
Main voltage for charging	110 to 240 V, 50/60 Hz (Hz AC automatic selection)
Material thickness	0,01 mm to 0,6 mm (0,5 to 6 kV) 0,02 mm to 6,5 mm (1 to 20 kV) 0,06 mm to 26,0 mm (2 to 40 kV)
Calibration	periodic, addicted from TQM

Item no.	Description
15114	PHD 0,5 up to 6 kV
12223	PHD 1 up to 20 kV
14752	PHD 2 up to 40 kV
12138	Flexible probe
10769	Steel brush electrode, 150 mm long
12140	Bronze testing brush, 230 mm long
11012	Mesh electrode, 250 mm wide
12141	Short pointed electrode, 50 mm long
12142	Extension rod, 200 mm long

Pinhole detector Models PHD -X


Mesh electrode	Bronze testing brush	Steel brush electrode	pointed electrode

bar electrode	Extension rod